Milling Cutter

wdt_ID	Category	Type	Design	Dia. from	Dia. to
1	Milling	Type F427-01	HPC Endmill with internal cooling, sharp edged	0.1575" [4.000 mm]	1.2598" [32.000 mm]
2	Milling	Type F427-02	HPC Endmill with internal cooling, with radius	0.1575" [4.000 mm]	1.2598" [32.000 mm]
3	Milling	Type F427-03	HPC Endmill with internal cooling, with corner chamfer	0.1575" [4.000 mm]	1.2598" [32.000 mm]
4	Milling	Type F428-01	HPC Endmill dry, sharp edged	0.1575" [4.000 mm]	1.2598" [32.000 mm]
5	Milling	Type F428-02	HPC Endmill dry, with radius	0.1575" [4.000 mm]	1.2598" [32.000 mm]
6	Milling	Type F428-03	HPC Endmill dry, with corner chamfer	0.1575" [4.000 mm]	1.2598" [32.000 mm]
7	Milling	Type P300	Insert pocket and end mill solid carbide, 3-fluted	0.0315" [0.800 mm]	1.2598" [32.000 mm]
8	Milling	Type F005-01	6 cutting edges counterboring tool with solid carbide tip	0.0709" [1.800 mm]	0.9843" [25.000 mm]
9	Milling	Type F24	Ball nose end mill solid carbide DIN 6527 + botek standard, 2-fluted	0.0591" [1.500 mm]	1.2598" [32.000 mm]
10	Milling	Type F34	Ball nose end mill solid carbide DIN 6527 + botek standard, 3-fluted	0.0591" [1.500 mm]	1.2598" [32.000 mm]
11	Milling	Type F44	Ball nose end mill solid carbide DIN 6527 + botek standard, 4-fluted	0.0591" [1.500 mm]	1.2598" [32.000 mm]
12	Milling	Type F20	Solid carbide cutter as per DIN 6527 + botek standard, 2-fluted	0.0591" [1.500 mm]	1.2598" [32.000 mm]
13	Milling	Type F30	Solid carbide cutter as per DIN 6527 + botek standard, 3-fluted	0.0591" [1.500 mm]	1.2598" [32.000 mm]
14	Milling	Type F40	Solid carbide cutter as per DIN 6527 + botek standard, 4-fluted or more	0.0591" [1.500 mm]	1.2598" [32.000 mm]

Milling Cutter

Technische Hotline: